Zoom image

LS150 Header Set, GM LS Engines

The LS150 fits a variety of applications using GM LS-Series engines.

  • $525.00
Qty:  
Add a different product to compare
  • Weight
    15.0000 lbs
  • SKU
    LS150-SEC

Sanderson's  patented flange design requires no gasketsThe LS150 is designed to fit a variety of applications using GM LS-Series engines.

With an all new flange and reworked tube bends for a tight fit, our LS150 header provides ample spark plug clearance to fit a variety of street rod applications. The 1½" primary tube diameter and 2½" collector are perfect for a stock to mild LS engine. Comes with all hardware necessary for installation.

NOTE: For higher power output applications, this header is also available in 1-5/8" (#LS158) or 1-3/4" (LS134) primary tube diameters with a 3.0" collector.

SPECIFICATIONS:

Engine : Chevy LS1 (5.7L); LS2 (6.0L); LS3 (6.2L): LS4 (5.3L) LS6 (5.7L)
Primary Tube Diameter : 1½"
Collector Diameter : 2½"
Weight : 15 LBS / 6.8 KGS

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set

 

OPTIONS:

Our Aluminized Ceramic Coating is available and RECOMMENDED on all Sanderson Headers. We apply a multi-layer inside and outside silver ceramic coating in-house to meet our high standards of quality, and polish the coated header to a high luster. This coating provides aerospace and military technology to your vehicle to control the heat in your engine bay, improve cylinder scavenging of exhaust gases, and increase the longevity of your header investment. (read more here)

  • Header Finish
    Silver Ceramic Coated, Black Satin, Plain Steel (Unfinished)
  • LS Engine
    LS1 5.7L, LS2 6.0L, LS3 6.2L, LS4 5.3L, LS6 5.7L

Product questions

  • Gary Blackshire
    Mar 11, 2017, 17:28

    I have a 1984 GMC Full Size Jimmy 4x4 with LS 5.3, 4L60 Trans, will these headers fit or is there another # that would be better

    Administrator
    Mar 13, 2017, 09:56

    LS10 (I also responded to the ticket you submitted on our Helpdesk)

  • Jim
    Jan 3, 2017, 11:25

    Looking for headers for a 56 Chevy truck with a 2008 6.0 LY6 engine. Iron block with L92 heads.

    Administrator
    Jan 3, 2017, 11:28

    Either the LS150 or the CC1LS1 header sets fit the '56 Chevy truck.

  • Joshua chamness
    Jun 30, 2016, 23:07

    Will this header work with stock steering on a 53 Chevy delivery with ls swa

    Administrator
    Jun 30, 2016, 23:16

    The LS150 header fits cross steering or rack and pinion. on the '53 Chevy.

  • Dustin sanders
    Apr 11, 2016, 14:52

    Are these headers bent the same for right and left side?

    Administrator
    Apr 11, 2016, 15:17

    The two sides are very similar, but yes the header design is mirrored. Slight variations exist to accommodate steering on the driver side and the starter on the other.

  • Rob Saunders
    Mar 20, 2016, 21:12

    Do you have a header that will fit an LS1 in a 56 chev pickup.

    Administrator
    Mar 20, 2016, 21:34

    Either this header (LS150) or the CC1LS1 fits the '56 Chevy truck applications.

DIMENSIONS:

When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

 NOTE: Image graphic is generic and not exact representation of product. 

Tube Size 1½" 
Collector Size 2½" 
  LEFT RIGHT
DIM A 2¼" 2¼"
DIM B 8" 8"
DIM C ----- -----
Weight (Lbs / Kg) 15 / 6.80
Sanderson Shorty Header Dimension Graphic

 

Vehicle Applications

Steering

1927-1929 Cars & Trucks CS / RP
1930-1931 Cars & Trucks CS / RP
1932-1934 Cars & Trucks CS / RP
1935-1941 Cars & Trucks CS / RP
1946-1948 Cars & Trucks CS / RP
1949-1954 Chevrolet Cars CS / RP
Pre-1930 Chevrolet/GMC Truck
CS / RP
1955-1959 Chevrole/GMC Truck CS / RP
1960-1972 Chevrolet/GMC Trucks Stock / CS / RP
1982-Up Chevrolet S10, S10 Blazer CS / RP
1982-UP GMC S15, S15 Jimmy CS / RP
1967-1969 Chevrolet Camaro (with Rack & Pinion) RP
1967-1969 Pontiac Firebird (with Rack & Pinion) RP

Engine Applications:

  • GM LS-Series Engines
  • LS1 (5.7L)
  • LS2 (6.0L)
  • LS3 (6.2L)
  • LS4 (5.3L)
  • LS6 (5.7L)

 

GENERAL NOTES:

  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS WARRANTY.

 

* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty

 

Downloadable Version Download File

 

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.00
  • Choose the product options first
    Add a different product to compare
    • $30.00
  • Choose the product options first
    Add a different product to compare
    • $22.00

Related products

  • Choose the product options first
    Add a different product to compare
    • $535.00
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.00
  • Choose the product options first
    Add a different product to compare
    • $30.00
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.00
  • Choose the product options first
    Add a different product to compare
    • $565.00

Customers who viewed this product bought

  • Choose the product options first
    Add a different product to compare
    • $30.00
  • Choose the product options first
    Add a different product to compare
    • $22.00
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.00
  • Choose the product options first
    Add a different product to compare
    • $535.00
  • Choose the product options first
    Add a different product to compare
    • $525.00