Sanderson F302 Header Set
Zoom image

F302 Full Length Ford (221-302) Header Set

The F302 full length header set fits a variety of 1923-40 street rods and trucks using small block Ford 289-302 engines.

  • $663.40
Qty:  
Add a different product to compare
  • Weight
    25.0000 lbs
  • SKU
    F302-SEC

Sanderson's  patented flange design requires no gasketsThe F302 full length header set fits all 1923-Up cars and trucks with conventional or Mustang style cross steering or rack and pinion setups. The F302 works with front or side engine mounts and offers excelent ground and side-to-side clearances. Fits 220-302 small block Ford engines.

NOTE: For 351W applications, order #F351.

CYLINDER HEAD NOTES: Please specify cylinder head used when ordering. Some cylinder heads (specifically square port) subject to additional charge.

Comes with all hardware necessary for installation.

SPECIFICATIONS:

Engine : Small Block Ford 289-302
Primary Tube Diameter : 1½"
Collector Diameter : 2½"
Weight : 25 LBS / 11.34 KGS

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set
     

OPTIONS:

Our Aluminized Ceramic Coating is available and RECOMMENDED on all Sanderson Headers. We apply a multi-layer inside and outside silver ceramic coating in-house to meet our high standards of quality, and polish the coated header to a high luster. This coating provides aerospace and military technology to your vehicle to control the heat in your engine bay, improve cylinder scavenging of exhaust gases, and increase the longevity of your header investment. (read more here)

  • Header Finish
    Silver Ceramic Coated, Black Satin, Plain Steel (Unfinished)
  • Engine Group
    221-302
  • Transmission
    C4 / C6, AOD, Manual

Product questions

  • Thomas Tucker
    Mar 14, 2019, 14:22

    Will the full length headers SBF 302 AOD trans fit a 1937 Ford coupe with stock chassis and Mustang 2 suspension?

    Administrator
    Mar 14, 2019, 16:51

    No. Please look at part #FF5

  • Marc Honey
    Feb 25, 2019, 13:17

    Do you know if these will fit a '49-'50 Ford w/C4 transmission transplant? Car currently has "full length" headers, but they're trashed and don't know who built them.

    Administrator
    Feb 25, 2019, 13:23

    On a '49-50 Ford, a shorty header is required. Part #FF5 (289/302) or #FF4 (351w).

  • Lonnie moon
    Feb 18, 2019, 15:29

    Will this long tube fit my 65 falcon 289 with 4 speed. And will they fit GT40P heads? Thank you

    Administrator
    Feb 18, 2019, 15:32

    No

  • ron mclaughlin
    Apr 14, 2018, 14:48

    302 ford v8 and c4 automatic with a 1930 model a 5 window body on a pete and jakes frame kit-open engine bay as iam cloning the american grafitti 32 ford. your part# f302 sounds like it will fit. do you always stock this kit and what is the pricing for a ceramic set and can it purchased polished ? - thanks for your time- ron

    Administrator
    Apr 15, 2018, 17:13

    The description states ceramic coated as the default finish, and yes that default finish is also polished. Yes, the F302 fits the '30 Ford chassis. Availability varies.

  • Howard Lintz
    Jan 20, 2017, 17:55

    Will your 6302 Ford header work in a 1965 Ford Falcon? It is listed on Summit's web site.
    Thanks, Howard

    Administrator
    Jan 20, 2017, 17:58

    No. We do not offer a full length header for the Falcon. The correct header is the FF6. When selecting the 289/302 engine group (not 351W) the part number ends up as FF6-302.

DIMENSIONS:

When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

 NOTE: Image graphic is generic and not exact representation of product. 

Tube Size 1½" 
Collector Size 2½" 
  LEFT RIGHT
DIM A 2-3/8" 3"
DIM B 15¾" 15¾"
DIM C 17" 16"
Weight (Lbs / Kg) 25 / 11.34
Sanderson Header Dimension Graphic

 

Vehicle Applications

Steering

1927-1929 Cars & Trucks CS / RP
1930-1931 Cars & Trucks CS / RP
1932-1934 Cars & Trucks CS / RP
1935-1941 Cars & Trucks CS / RP

Engine Applications:

  • Small Block Ford (221-302) Engines

 

GENERAL NOTES:

  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS WARRANTY.

 

* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty

 

Downloadable Version Download File

 

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70

Related products

  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84
  • Choose the product options first
    Add a different product to compare
    • $663.40

Customers who viewed this product bought

  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Choose the product options first
    Add a different product to compare
    • $572.45
  • Choose the product options first
    Add a different product to compare
    • $561.75
  • Choose the product options first
    Add a different product to compare
    • $561.75