Sanderson CC1LS1 Header Set
Zoom image

CC1LS158 Header Set, GM LS Engines

The CC1LS158 is a blockhugger shorty design header featuring a larger 1-5/8" primary tube diameter for Chevy LS-series engines in a variety of 1927-Up cars and trucks. NOTE: Also fits LS7, 7.0L (427) LS engines!

  • $593.85
Qty:  
Add a different product to compare
  • Weight
    15.0000 lbs
  • SKU
    CC1LS158-SEC

Sanderson's  patented flange design requires no gasketsThe CC1LS158 blockhugger header is designed to fit 1927-Up cars and trucks with Chevrolet LS-series engines.

NOTE: This is a 1-5/8" primary tube version of the standard CC1LS1 header.

NOTE: Also fits LS7, 7.0L (427) LS engines!

This new design places the collector slightly off center, and being only 7¾" from the center of the flange to the bottom of the collector provides ample room for the tightest fit in a variety of vehicle applications. Comes with all hardware necessary for installation.

SPECIFICATIONS:

Engine : Chevy LS-series engines
Primary Tube Diameter : 1-5/8"
Collector Diameter : 2½"
Weight : 15 LBS / 6.80 KGS

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set
     

OPTIONS:

Our Aluminized Ceramic Coating is available and RECOMMENDED on all Sanderson Headers. We apply a multi-layer inside and outside silver ceramic coating in-house to meet our high standards of quality, and polish the coated header to a high luster. This coating provides aerospace and military technology to your vehicle to control the heat in your engine bay, improve cylinder scavenging of exhaust gases, and increase the longevity of your header investment. (read more here)

  • Header Finish
    Silver Ceramic Coated, Black Satin, Plain Steel (Unfinished)
  • LS Engine
    LS1 5.7L, LS2 6.0L, LS3 6.2L, LS4 5.3L, LS6 5.7L

Product questions

  • kyle
    Dec 18, 2018, 14:26

    I have a LS3 that I put into a 1930 model A. What is the outside to outside width with these headers mounted on an LS 3?

    Administrator
    Dec 18, 2018, 14:27

    Not a dimension we provide. Please review the "Dimensions" tab on the product details.

  • Jason Pantella
    Aug 15, 2018, 19:19

    I installed a lq4 in a 1955 Chevy 3100 truck (second series) the best fitting manifold I found so far is for a 2002 corvette. I do have to modify the drivers side as it hits the stock steering box. The engine is mounted to the bell housing in the factory location. Will these clear?

    Administrator
    Aug 15, 2018, 20:38

    Yes, the CC1LS1 (as well as the larger 1-5/8" version) is the correct header for the '55-59 Chevy trucks. However, it is important to ensure the engine is in the proper location. Being that this is an engine swap, having all the pieces available and in place prior to permanently determining engine location is a necessary process.

  • Levi Pence
    Apr 21, 2018, 20:00

    Will these fit the lq engines such as lq4 or lq9 I have a lq9 with 317 head I beleive the exhaust ports are the same as ls but I want to be sure

    Administrator
    Apr 21, 2018, 22:44

    Our LS-series header sets fit LS1, LS2, LS3, LS4, LS6 and LS7 engine applications, as noted in the product details. The LQ4/LQ9 are basically third generation LS engines (with the only major difference between the LQ4/LQ9 being the piston design). The exhaust port layout on these engines is the same as the LS1.

  • JARED
    Jan 5, 2018, 08:30

    Is this set of CC1’s mirrored or identical

    Administrator
    Jan 5, 2018, 13:29

    Not mirrored, not identical, but similar.

  • Gary Beal
    May 19, 2016, 04:42

    Do the #CC1LS158 headers have O2 bungs?

    Administrator
    May 19, 2016, 08:34

    No, with this length of header it is best to install the oxygen sensor below the header in the down pipe.

DIMENSIONS:

When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

 NOTE: Image graphic is generic and not exact representation of product. 

Tube Size 1-5/8" 
Collector Size 2½" 
  LEFT RIGHT
DIM A 4" 4"
DIM B 8" 8"
Weight (Lbs / Kg) 15 / 6.80
Sanderson Shorty Header Dimension Graphic

 

Vehicle Applications

Steering

1927-1929 Cars & Trucks CS / RP
1930-1931 Cars & Trucks CS / RP
1932-1934 Cars & Trucks CS / RP
1935-1941 Cars & Trucks CS / RP
1946-1948 Cars & Trucks CS / RP
1948-1952 Ford Trucks CS / RP
1953-1966 Ford Trucks Stock
1958-1964 Chevrolet Full Size Cars Stock
Pre-1930 Chevrolet/GMC Trucks
CS / RP
1949-1954 Chevrolet/GMC Trucks CS / RP
1955-1959 Chevrolet/GMC Trucks CS / RP
1960-1972 Chevrolet/GMC Trucks CS / RP

Engine Applications:

  • GM LS-Series Engines
  • LS1 5.7L
  • LS2 6.0L
  • LS3 6.2L
  • LS4 5.3L
  • LS6 5.7L
  • LS7 7.0L

 

GENERAL NOTES:

  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS WARRANTY.

 

* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty

 

Downloadable Version Download File

 

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart
  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84
  • Choose the product options first
    Add a different product to compare
    • $23.54
  • Choose the product options first
    Add a different product to compare
    • $561.75

Related products

  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84
  • Choose the product options first
    Add a different product to compare
    • $561.75

Customers who viewed this product bought

  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Choose the product options first
    Add a different product to compare
    • $561.75
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84
  • Choose the product options first
    Add a different product to compare
    • $604.55