Sanderson CC10 Header Set
Zoom image

CC10 Small Block Chevy Header Set

The CC10 is designed to fit small block Chevy engines in 1964-up Chevelle, El Camino, and pickup truck applications.

  • $540.35
Qty:  
Add a different product to compare
  • Weight
    17.0000 lbs
  • SKU
    CC10-SEC

Sanderson's  patented flange design requires no gasketsThe CC10 is a swept back, shorty header with the collectors exiting along the angle of the firewall to fit 1964 and Up Chevelle, El Camino, and pickup applications using a small block Chevy engine.

For straight plug cylinder heads only. Use of shorter "header" spark plugs is recommended. For applications using angle plug heads, please order #CC10AP.

Automatic transmission or manual with cable or hydrualic clutch linkage ONLY!

Comes with all hardware necessary for installation.

SPECIFICATIONS:

Engine : Small Block Chevy 265-400
Primary Tube Diameter : 1½"
Collector Diameter : 2½"
Weight : 17 LBS / 7.71 KGS

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set
     

OPTIONS:

Our Aluminized Ceramic Coating is available and RECOMMENDED on all Sanderson Headers. We apply a multi-layer inside and outside silver ceramic coating in-house to meet our high standards of quality, and polish the coated header to a high luster. This coating provides aerospace and military technology to your vehicle to control the heat in your engine bay, improve cylinder scavenging of exhaust gases, and increase the longevity of your header investment. (read more here)

  • Small Block Chevy
    • Header Finish
      Silver Ceramic Coated, Black Satin, Plain Steel (Unfinished)
    • Spark Plug Angle
      Straight Plug
    • Vortec Straight Plug Cylinder Head
      No, Yes

Product questions

  • Michael Ray
    Dec 16, 2019, 16:20

    I have a 1985 Chevy K-10 w/ Automatic Transmission. I put a 1973 Chevy 350 (with straight plugs) in it from a 1973 Camaro. Which Header do you recommend?

    Administrator
    Dec 17, 2019, 17:25

    CC10 or CC17

  • Tom Woodfin
    Sep 29, 2019, 11:59

    Will this fit a 65 chevy c10 with a 350 transmission on a 350sbc with edelbrock 60899 heads?

    Administrator
    Sep 29, 2019, 12:26

    On the '65 truck, use part #CC3.

  • Tony Spino
    Mar 30, 2019, 07:43

    What header is recommended? 1978 C10 sbc 350 5.7 auto w/AC and aftermarket aluminum heads. Thank you

    Administrator
    Mar 30, 2019, 09:12

    The CC17 or CC10. Then, it depends on the cylinder heads used (straight or angle plug) and stating whether or not the heads use a true D-port exhaust.

  • Stuart Saville
    Nov 18, 2018, 11:10

    Hi are these 2.5" collector size??

    Regards Stuart

    Administrator
    Nov 18, 2018, 20:54

    Note: Product Details under "Specifications" or by clicking on the "Dimensions" tab. This answer is in both of those places. Yes, the collector is 2.5".

  • Stuart Saville
    Nov 18, 2018, 11:00

    Hi will these be suitable on my 61 C10 apache Stepside running a stock 350sbc??

    Regards Stuart

    Administrator
    Nov 18, 2018, 20:55

    On the '61 truck, the CC3 is typically the correct choice.

DIMENSIONS:

When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

 NOTE: Image graphic is generic and not exact representation of product. 

Tube Size 1½" 
Collector Size 2½" 
  LEFT RIGHT
DIM A 4.0" 4.0"
DIM B 8½" 8½"
DIM C 24" 24"
Weight (Lbs / Kg) 17 / 7.71
Sanderson Shorty Header Dimension Graphic

 

Vehicle Applications

Steering

Transmission

1964-1972 Chevrolet Chevelle & Malibu Stock Automatic**
1964-1972 Chevrolet El Camino Stock Automatic**
1970-1972 GMC Sprint Stock Automatic**
1960-1987 Chevrolet / GMC Pickups Stock Automatic**
** Manual Applications using cable or hydraulic clutch setups ONLY.  
"Other" Similar GM Chassis (if using small block Chevy engine) Stock Automatic
Applications using Chevelle front clip frame grafts Stock Automatic

Engine Applications:

  • Chevrolet Small Block 265-400 V8 Engines
  • (Straight plug cylinder heads only)

For straight plug cylinder heads only. Order part number CC10AP for angle plug cylinder heads.

Spark Plugs:

Use of shorter "header plugs" necessary for most cylinder heads.

GENERAL NOTES:

  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS WARRANTY.

 

* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty

 

Downloadable Version Download File

 

Related products

Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84
  • Choose the product options first
    Add a different product to compare
    • $540.35
  • Choose the product options first
    Add a different product to compare
    • $593.85
  • Choose the product options first
    Add a different product to compare
    • $593.85

Customers who bought this product also bought

  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84

Customers who viewed this product bought

  • Choose the product options first
    Add a different product to compare
    • $32.10
  • Choose the product options first
    Add a different product to compare
    • $561.75
  • Drag and drop me to the cart
    Add a different product to compare
    • $10.70
  • Choose the product options first
    Add a different product to compare
    • $593.85
  • Drag and drop me to the cart
    Add a different product to compare
    • $12.84