Sanderson CV08 Header Set

CV08 Header Set, Chevy V6 Engines

The CV08 header set for 90° Chevy V6 (262 cid / 4.3L) engines fits Jeeps, Landcruisers, and many other applications.

  • $515.00
  • Header Finish
Add a different product to compare
  • Weight
    15.0000 lbs
  • SKU

Sanderson's patented flange design requires no gaskets

The CV08 offers a rear exit design for Chevy 90° V6 engine swaps in Jeeps, Landcruisers, and other applications where a center down collector exit would interfere with chassis or steering components.

Comes with all hardware necessary for installation.


Engine : 90° Chevrolet V6 Engines (4.3L / 262")
Primary Tube Diameter : 1½"
Collector Diameter : 2½"
Weight : 14 LBS / 6.35 KGS


  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


  • Header Bolt Set
  • Collector Reducer Set



Our Aluminized Ceramic Coating is available and RECOMMENDED on all Sanderson Headers. We apply a multi-layer inside and outside silver ceramic coating in-house to meet our high standards of quality, and polish the coated header to a high luster. This coating provides aerospace and military technology to your vehicle to control the heat in your engine bay, improve cylinder scavenging of exhaust gases, and increase the longevity of your header investment. (read more here)

  • Header Finish
    • Header Finish
      Silver Ceramic, Satin Black Ceramic, Plain Steel (unfinished)

Product questions

  • richard
    Aug 29, 2016, 12:00

    Does landcruiser include the FJ40 or just later model? would you reccomend the CV95 for FJ40's for a better fit?

    Aug 30, 2016, 10:09

    The CV08 is the better choice for the FJ40.


When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

 NOTE: Image graphic is generic and not exact representation of product. 

Tube Size 1½" 
Collector Size 2½" 
DIM A 4" 4"
DIM B 8¼" 8¼"
DIM C ---- ----
Weight (Lbs / Kg) 14 / 6.35
Sanderson Shorty Header Dimension Graphic


Vehicle Applications


Jeep Stock
Toyota Landcruiser Stock

CS = Standard Cross Steer; RP = Rack & Pinion

Engine Applications:

  • Chevrolet 90° V6 (262cid / 4.3L) Engines


  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.



* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty


Downloadable Version Download File


Customers who viewed this product bought

Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart Product is out of stock Choose the product options first
    Coming soon...
    Add a different product to compare
    • $30.00
  • Drag and drop me to the cart Product is out of stock Choose the product options first
    Coming soon...
    Add a different product to compare
    • $12.00